Conference papers

  • Published: Sunday, 29 September 2019 06:00
  • Written by Super User
  • Hits: 123
  Professor of Computational Mechanics
Dean of School of Civil Engineering,

Director of High Performance Computing Lab,
University of Tehran, Tehran, IRAN
Tel:+98-21-6111 2258, Fax:+98-21-6640 3808, Cell:+98-912-5030392
Email:This email address is being protected from spambots. You need JavaScript enabled to view it.
Homepage:http://chpc.ut.ac.ir/smohammadi
facebook.com/prof.soheil.mohammadi
available on major social networks
 
 
 
Conference papers
 
 Enriched variable node multiscale approach: coupling the
   atomistic and continuum scales
   O. Alizadeh, S. Mohammadi
   Keynote Speech, International Conference on Advances in
   Sustainable Technologies (ICAST-2020), 6-7 Nov. 2020, Lovely
   University Punjab, India.
 
  Simulation of healing process in bio-composites: a case study of
    human skin
    K. Khaksar, S. Mohammadi
    The 7th International Conference on Composites:
    Characterization, Fabrication and Application (CCFA-7),
    Dec. 23-24, 2020, Sahand University of Technology, Tabriz,
    Iran, 2 pages.
 

  On the fatigue behavior of shear studs in steel-concrete
   composite bridge girders  
   M.S. Mafipour, S. Tatlari, A.R. Ghiami Azad, M. Shahverdi, S.
   Mohammadi
   3rd International Conferemce on Applied Researches in
   Structural Engineering and Construction Management, June
   2019, Sharif University of Technology, Tehran, Iran, 12 pages.

 

 Atomistic modelling of near crack tip plasticity in FCC metals
   S. Akhavan, M. Khodadad, O. Alizadeh, S. Mohammadi
   11th International Congress on Civil Engineering, 8-10 May 2018,
   University of Tehran, Tehran, Iran, 7 pages.

 

 Nonlocal damage analysis of carbon fiber reinforced concrete
   with the embedded fiber element method
   A.Jafari, H. Bayesteh, S. Mohammadi
   11th International Congress on Civil Engineering, 8-10 May 2018,
   University of Tehran, Tehran, Iran, 7 pages.

 

 Concurrent multiscale modeling of interlaminar nano crack
   propagation under cyclic loading
   O.Alizadeh, H. Moslemzadeh, S. Mohammadi
   11th International Congress on Civil Engineering, 8-10 May 2018,
   University of Tehran, Tehran, Iran, 7 pages.

 

 The evolution of triclinic, discontinuous heterogeneous flow of
    transpression zones using FEM (in Persian)
    S.T. Nabavi, S.A. Alavi, S. Mohammadi, M.R. Ghassemi
    5th National Conference, Urban Land Organization, Dec. 2017, 8
    pages.

 

 Mechanical evolution of transpression zones affected by fault
   interactions: insights from 3D elasto-plastic finite element
   models
   S.T. Nabavi, S.A. Alavi, M. Frehner, S. Mohammadi, M.R.
   Ghassemi
   15th Swiss Geoscience Meeting, Davos 2017, 2 pages.

 

 Numerical XFEM fracture analysis of FRP repaired pipelines
   Z.Valadi, H. Bayesteh, S. Mohammadi
   12th International Conference on Coasts, Ports and Marine
   Structures
(ICOPMAS 12, 2016), ICOPMAS12_146, 2 paegs.

 

 Civil engineering: A new horizon
   S. Mohammadi
   Faculty of Engineering, University of Tehran, Nov. 2016, Tehran,
   Iran.

 

 Analysis of transpression within contractional planar fault steps
   using the finite-element method
   S.T. Nabavi, S.A. Alavi, S. Mohammadi, M.R. Ghassemi, M.
   Shirazaei
   GSA 2016, 2 pages, 25-28 Sep. 2016, Denver, USA.

 
 

 An XFEM approach in solving frictional contact problems based
   on the penalty formulation
   Saeed Monir, S. Mohammadi, S.V. Khansari
   10th International Congress on Civil Engineering, May 2015, Tabriz,
   Iran, 
A-10-2196-1

 

 A study on the effect of collagen fiber orientation on mechanical
   response of soft biological tissues
   Fathi, S. Shahi, S. Mohammadi
   Advances in Mechanical Engineering (ICAMDE 2015), 26-27
   August 2015, Bali, Indonesia, 1570095527.

 

 Quasicontinuum study of dislocation nucleation and ransmission
    in FCC thin film coating during nanoindentation
    Tolooei, O. Alizadeh, S. Mohammadi
    5th International Conference on Ultrafine Grained and
    Nanostructured Materials (UFGNSM 2015), November 11-12,
    2015, Tehran, Iran, 1146-UFGNSM15.

 

 Determination of dynamic fracture parameters for cubic 
   specimen using the extended finite element method (in persian)
   Khandouzi, S. Mohammadi
   5th Iranian Rock Mechanics Conference (IRMC5), May, 2014,
   Tehran, Iran

 

 XFEM Modelling of transition of micro damage mechanics into
   quasi brittle fracture
   Hatefi Ardakani, S. Mohammadi, I. Mahmoudzadeh kani
   International Conference on Extended Finite Element Method,
   XFEM 2013, 11-13 September, 2013, Lyon, France, 1 page.

 

 Dynamic fracture analysis of isotropic materials using the
   extended finite element method with optimal frequency   
   dissipation
   Mahdavi, S. Mohammadi
   2nd International Conference on Mechanical Engineering and
   Mechatronics (ICMEM 2013), Toronto, Ontario, Canada, August
   8-10 2013, Paper 169-1-7.

 
 

 A numerical hydraulic fracture model using the extended finite
   element method
   Mahdavi, S. Mohammadi
   International Conference on Mechanical and Industrial
   Engineering (ICMIE'2013), August 28-29, 2013, Penang
   (Malaysia), 92-96.

 
 

 Multiscale analysis of plasticity in steel (In persian)  
   A.R. Keyhani, S. Mohammadi, R. Roumina
   7th National Congress of Civil Engineering, Zahedan, Iran, April
   2013, 16 pages.

 
 

 Fracture analysis of quasi-brittle materials by damaged based
   extended finite element method (In persian)
   Hatefi Ardakani, S. Mohammadi, I.M. Kani  
   
7th National Congress of Civil Engineering, Zahedan, Iran, April
   2013, 8 pages.

 
 

 A finite element method for thermo-mechanical coupling
   analysis of shape memory alloys
   Ahmadian, S. Mohammadi
   XII International Conference on Computational Plasticity.
   Fundamentals and Applications, COMPLAS XII, Sep. 2013,
   Barcelona, Spain, 1-12

 
 

 Two dimensional creep analysis of a linear cracked viscoelastic
   medium using the extended finite element method
   Hajikarimi, S. Mohammadi, S. Aflaki
   European Congress on Computational Methods in Applied
   Sciences and Engineering (ECCOMAS 2012), Vienna, Austria,
   September 10-14, 2012

 
 

 Moving least square approximation for fault slip in source
   modeling of earthquakes
   Etemadsaeed, A. Ansari, S. Mohammadi
   3rd QUEST Workshop, May 20-26, 2012, Tatranska Lomnica,
   Slovakia, 1 page.

 
 

 On the buckling analysis of defective carbon nanotubes by
   molecular structural mechanics approach
   Eftekhari, S. Mohammadi
   Mechanics of Nano, Micro and Macro Composite Structures,
   Politecnico di Torino, 18-20 June 2012, paper 131, 3 pages.

 
 

 Finite strain fracture analysis using the extended finite element
   method
   Rahsetnia, S. Mohammadi, I.M. Kani  
   European Congress on Computational Methods in Applied
   Sciences and Engineering (ECCOMAS 2012), Vienna, Austria,
   Sep. 10-14, 2012, 9 pages, 2499_003029.

 
 

 Orthotropic enriched extended isogeometric analysis for fracture
   analysis of composites
   S.Sh. Ghorashi, N. Valizadeh, S. Mohammadi
   8th International Conference on Engineering Computational
   Technology, Stirlingshire, Scotland, Civil-Comp Press, 2012,
   Paper 46, 13 pages.

 
 

 Extended isogeometric analysis of plates with curved cracks 
   S.Sh. Ghorashi, N. Valizadeh, S. Mohammadi, T. Rabczuk
   8th International Conference on Engineering Computational
   Technology, Stirlingshire, Scotland, Civil-Comp Press, 2012,
   Paper 47, 11 pages.

 
Anisotropic/orthotropic XFEM for fracture analysis of structures
   S. Mohammadi
   The 2nd International Conference on the Extended Finite
   Element Method(XFEM2011), Cardiff, UK, 2011

Simulation of strong tangential discontinuity for XFEM shear
   band evolution
   A.R. Daneshyar, S. Mohammadi
   The 2nd International Conference on the Extended Finite
   Element Method(XFEM2011), Cardiff, UK, 2011

Analysis of cracked orthotropic media using the extended
   isogeometric
   analysis(XIGA)
   S.Sh. Ghorashi, N. Valizadeh, S. Mohammadi
   The 2nd International Conference on the Extended Finite
   Element Method (XFEM2011), Cardiff, UK, 2011

 An improved isogeometric analysis using the Lagrange multiplier
   method
   N. Valizadeh, S.Sh. Ghorash, S. Mohammadi, S. Shojaee, H.
   Ghasemzadeh
   The 2nd International Conference on the Extended Finite
   Element Method(XFEM2011), Cardiff, UK, 2011

Debonding propagation analysis of FRP reinforced beams by the
   extended finite element method
   S. Esna Ashari, S. Mohammadi
   The 2nd International Conference on the Extended Finite
   Element Method (XFEM2011), Cardiff, UK, 2011
 
Fully coupled modeling of interaction between hydraulic and
   natural fractures in naturally fractured reservoirs by XFEM: The
   effect of  pore pressure change
   R. Keshavarzi, S. Mohammadi
   The 2nd International Conference on the Extended Finite
   Element Method(XFEM2011), Cardiff, UK, 2011

Two-dimensional dynamic extended finite element method for
    simulation of seismic fault rupture
    
M. Parchei, S. Mohammadi, H. Zafarani
    The 2nd International Conference on the Extended Finite
    Element Method (XFEM2011), Cardiff, UK, 2011

Crack propagation in a pressurized stiffened cylindrical shells by
   XFEM
   H. Bayesteh, S. Mohammadi
   The 2nd International Conference on the Extended Finite
   Element Method (XFEM2011), Cardiff, UK, 2011

Enhancement of isogeometric analysis method for analysing 2D
   cracked problems using extrinsic enrichment functions.
   
S.S. Ghorashi, N. Valizadeh, S. Mohammadi, H. Ghasemzadeh, S.
   Shojaei
   2nd International Engineering Mechanics and Materials
   Speciality Conference, Ottawa, Canada, 2011, GC-041 1-10.

Improving the enforcement of essential boundary conditions in
   isogeometric analysis by the Lagrange multiplier method.
   S.S. Ghorashi, N. Valizadeh, S. Mohammadi, H. Ghasemzadeh, S.
   Shojaei
   19th National Mechanical Engineering Confeence (ISME 2011),
   Birjand, Iran, 2011, (In Persian).

Simulation and analysis of cracked plates by a wavelet based
   adaptive element free
   Galerkin meshless method
   S.S. Ghorashi, H. Yousefi, S. Mohammadi
   6th National Congress of Civil Engineering (6NCCE), Semnan,
   Iran, 2011, 4085, (In Persian).

Enriched element free Galerkin method for analysis of 2D
   isotropic and orthotropic crack problems
   S.S. Ghorashi, S. Sabagh-yazdi, S. Mohammadi
   6th National Congress of Civil Engineering (6NCCE), Semnan,
   Iran, 2011, 4087, (In Persian).

Numerical study of induced gas pressure on controlled blasting.
   M. Goodarzi, S. Mohammadi, A. Jafari
   6th National Congress of Civil Engineering (6NCCE), Semnan,
   Iran, 2011, 2987, (In Persian).

Analytical solution for shock wave propagation in granular
   materials
   M.M. Ahmadi, S. Mohammadi, A. Nemati Hayati
   13th Annual and 2nd International Fluid Dynamics Conference,
   FD-2010-26-28 Oct., Shiraz University, Shiraz, Iran, (In
   Persian).

Modeling interface crack between orthotropic and isotropic
   materials using extended finite element method
   S. Esnaashari, S. Mohammadi
   9th International Congress on Advances in Civil Engineering, 27-
   30 September 2010, Karadeniz Technical University, Trabzon,
   Turkey.

Contact theory for deformable blocks in three-dimensional
   discontinuous deformation analysis (3-D DDA)
   S.A.R. Beyabanaki, M.R. Yeung, S. Mohammadi, Y.N. Gao,
   American Rock Mechanics Association, ARMA 10-316, 2010.

Modeling delamination in composite laminates using XFEM by
   new orthotropic enrichment functions
   S. Esnaashari, S. Mohammadi
   WCCM/APCOM 2010, IOP Conf. Series: Materials Science and
   Engineering 10 (2010) 012240, pp:1-8.

 Numerical simulation of concrete beam under low velocity
   impact
   Farnam, S. Mohammadi, A. Bagherzadeh, S.K. Babanejad
   4th International Conference on Construction Materials: 
   Performance, Innovations and Structural Implications
   (ConMat’09), Behavior under Seismic, Fatigue and Impact
   Loading, Nagoya, Japan, 2009, S4-4-4, 185-190.

 
X-FEM analysis of delamination between FRP laminates and
   concrete by new orthotropic enrichment functions
   S. Esnaashari, S. Mohammadi
   1st International Conference on Concrete Technology, Tabriz,
   Iran, November 2009.

Contact theory for deformable blocks in three-dimensional
   discontinuous deformation analysis (3-D DDA)
   S.A.R. Beyabanaki, M.R. Yeung, S. Mohammadi
   ICADD9, Singapore, November 2009.

Numerical simulation of the gas-fluid interaction in underwater
   explosion by the
   smoothed particle hydrodynamics method
   M.R. Afrasiabi, S. Mohammadi
   Institute of Continuum Mechanics (GACM09), Hannover,
   Germany, September 2009.

Analysis of bubble pulsations of underwater explosions by the
   smoothed particle hydrodynamics method
   M.R. Afrasiabi, S. Mohammadi
   International Conference on Particle Based Methods, Barcelona,
   Spain, November 2009.

 
XFEM delamination analysis of composite laminates by new
   orthotropic enrichment functions
   S. Esnaashari, S. Mohammadi
   International Conference on Extended Finite Element Method –
   Recent Developments and  Applications (XFEM 2009), Aachen,
   Germany, 2009.

 
Experimental and numerical studies of impact behaviour of fiber
    lightweight aggregate concrete
    Yaghoob Farnam, Mehrdad Mahoutian, Soheil Mohammadi,
    Mohammad Shekarchi
    Structures 2008: Crossing Borders, Vancouver, Canada, 2008.

 
Fracture analysis of FRP composites using a meshless finite
   point collocation method
   M. Shahverdi, S. Mohammadi
   4th International Conference on FRP Composites in Civil
   Engineering (CICE 2008), Zurikh, Switzerland, 2008.

 
Modelling complex gas flow-fractured solid interaction by a
   finite/discrete element method.
   S. Mohammadi
   8th World Congress on Computational Mechanics (WCCM8),
   Venice, Italy, 2008.

 
Improving 3D mechanisms used in mechanism-based discrete
   dislocation plasticity
   by considering periodic boundary conditions
   S. Soleimani, S. Mohammadi, M. Rahimian
   8th World Congress on Computational Mechanics (WCCM8),
   Venice, Italy, 2008.

 
Analysis of cracked orthotropic media by an enriched finite point
   method (EPFM)
   M. Shahverdi, S. Mohammadi
   8th World Congress on Computational Mechanics (WCCM8),
   Venice, Italy, 2008.

 
Experimental and numerical investigation of impact behaviour of
   SIFCON concrete panels
   Y. Farnam, S. Mohammadi, M. Shekarchzadeh
   4th National Civil Engineering Conference, Tehran, Iran, 2008
   (In Persian).

 
Numerical study of single batter piles
    H. Omidali, S. Mohammadi, A. Fakher
    4th National Civil Engineering Conference, Tehran, Iran, 2008
    (In Persian).

 
Analysis of discontinuous problems using the meshless finite
   point method
   M. Shahverdi, S. Mohammadi
   4th National Civil Engineering Conference, Tehran, Iran, 2008
   (In Persian).

 
Anisotropic fracture analysis of composites by the extended
   finite element method (XFEM)
   S. Mohammadi, A. Asadpoure, A. Vafai
   6th National Aerospace Engineering Conference, Tehran, Iran,
   2006.

 
A novel approach to analyse a crack with the XFEM in composite
   media
   S. Mohammadi, A. Asadpoure
   2nd Asia-Pacific International Conference on Computational
   Methods in Engineering (ICOME 2006), Hefei, China, November
   2006.

 
Numerical investigation of the behaviour of batter piles under
   normal and lateral forces
   H. Omidali, S. Mohammadi, A. Fakher
   International Conference of Ports and Shipping (ICOPMAS
   1385), Tehran, Iran, 2006 (In Persian).

 
A new approach for elimination of dissipation and dispersion
   errors in particle methods
    H. Ostad-Hossein, S. Mohammadi
    3rd European Conference on Computational Methods (ECCM),
    Lisbon, Portugal, 2006.

 
Solving the chloride diffusion equation in concrete structures for
   prediction of initiation time of corrosion using the finite point
   method
   M. Bitaraf, S. Mohammadi
   3rd European Conference on Computational Methods (ECCM),
   Lisbon, Portugal, 2006.

 
Application of the finite point method for analysis of bending
   plates
   S. Mohammadi, M. Bitaraf
   7th International Civil Engineering Conference, Tehran, Iran,
   2006 (In Persian).

 
 A checkerboard-controlling filter for topology optimization base
   on stress distribution
    K. Ghabraei, S. Mohammadi
    6th World Congresses of Structural and Multidisciplinary
    Optimization, Rio de Janeiro, Brazil, 2005.

 
Analysis of underground shells subjected to high velocity
   impacts
   S. Mohammadi, A. Mahootchian
   Conference on Passive Defence Engineeting, Tehran, Iran, 2005
   (In Persian).

 
Combined finite/discrete element method
    S. Mohammadi
    1st Conference on Computer Simulation in Civil Engineeting,
    Tehran, Iran,
    2005 (In Persian).

 
Simulation of bond failure in RC beams strengthened with FRP
   sheets subjected to dynamic/ impact loadings
   S. Mohammadi, A.A. MousaviKhandan
   International Symposium on Bond Behaviour of FRP in
   Structures (BBFS 2005), Adelaide, Australia 2005.

 
Extended finite element method in an orthotropic cracked
   medium
   A. Asadpoure, S. Mohammadi, A. Vafai
   Computational Plasticity – COMPLAS VIII, Barcelona 2005, 1110-
   1113.

 
Modeling crack in orthotropic medium using extended finite
   element method
   A. Asadpoure, S. Mohammadi, A. Vafai
   ECCOMAS thematic conference on meshless methods, Lisbon,
   2005, D47.1-D47.6

 
Improving time integration method of CSPM meshless method in
   two dimensional elastodynamic problems
   H. Ostad-hossein, S. Mohammadi
   ECCOMAS thematic conference on meshless methods, Lisbon,
   2005, D35.1-D35.4

 
Solving partial differential equations for plate bending problems
   using finite point method
   M. Bitaraf, S. Mohammadi
   ECCOMAS thematic conference on meshless methods, Lisbon,
   2005, D25.1-D25.6

 
Modelling missile impact and explosion by a finite/discrete
   element gas-solid interaction
   S. Mohammadi
   Computational Ballistics II, Cordoba, Spain, 115-127, 18-20 May
   2005.

 
Progressive fracture analysis of reinforced concrete structures
   by the discrete element method
   M. Aram, S. Mohammadi
   2nd International Conference on Concrete and Development,
   Tehran, Iran, 2005 (In Persian).

 
A numerical model for gas-fractured solid interaction for
   simulation of explosion by the finite/discrete element method
   A. Pooladi-heravi, S. Mohammadi, A. Behbamzadeh
   2nd National Civil Engineering Conference, Tehran, Iran, 2005
   In Persian).

 
On convergence of dynamic analysis of structures: part 3-
   effects of hardware specifications on  convergence of step-by-
   stepp numerical integrations
   A. Soroushian, J. Farjoodi, S. Mohammadi, F. Rahimzadeh
   2nd National Civil Engineering Conference, Tehran, Iran, 2005
   (In Persian).

 
Improvements of the meshless SPH method for solving dynamic
   systems
   H. Ostad-hossein, S. Mohammadi
   2nd National Civil Engineering Conference, Tehran, Iran, 2005
   (In Persian).

 
Progressive fracture analysis of concrete structures by the
   discrete element method
   M. Aram, S. Mohammadi
   2nd National Civil Engineering Conference, Tehran, Iran, 2005
   (In Persian).

 
Analysis of composites by the extended finite element method
   (X-FEM)
   A. Assadpoure, S. Mohammadi, A. Vafai
   2nd National Civil Engineering Conference, Tehran, Iran, 2005
   (In Persian).

 
Improvements of the meshless SPH method for solving dynamic
   systems
   H. Ostad-hossein, S. Mohammadi
   2nd National Civil Engineering Conference, Tehran, Iran, 2005
   (In Persian).

 
A comparison of service life prediction of concrete structures
   using the element free galerking, finite element and finite
   difference method
   H. Taghaddos, F. Mahmoodzadeh, A. Noorzad, S. Mohammadi, A.
   Ansari
   7th International Conference on Computational Structures
   Technology(Civil-Comp), Lisbon, Portugal, 2004.

 
A gas flow-solid interaction model for simulation of rock blasting
    S. Mohammadi, A. Behbamzadeh
    2nd Iranian National Conference on Rock Mechanics, Tehran,
    Iran, 635-643, 2004 (In Persian).

 
Modelling dynamic response of concrete beams strengthened by
   FRP composites
   A.A. Moosavi-khandan, S. Mohammadi
   1st National Civil Engineering Conference, Tehran, Iran, 119,
   May 2004 (In Persian).

 
Numerical modeling of RC beams strengthened with CFRP under
   dynamic loading
   S. Mohammadi, A.A. Mousavi Khandan
   FRP Composites in Civil Engineering – CICE 2004, Australia, 201-
   209, 2004.

 

3D adaptive multi fracture analysis of composites
    S. Mohammadi, S. Forouzan-sepehr
    Modern Practice in Stress and Vibration Analysis, Glasgow,
    Scotland, 145-152, September 2003.

 
Adaptive numerical simulation of machining process involving
   chip creation.
   S. Mohammadi, R. Adibi-asl, M. Vaz, Jr.
   Modern Practice in Stress and Vibration Analysis, Glasgow,
   Scotland, 169-176, September 2003.

 
Modelling concrete beams strengthened by FRP composites
   subjected to dynamic loadings
   A.A. Moosavi-khandan, S. Mohammadi
   1st Conference on Application of FRP composites in structural
    retrofitting, Tehran, Iran,121-138, 2003 (In Persian).

 
Analysis of thin-walled strcutures subjected to impact loadings
   A. Mahootchian, S. Mohammadi, I.M. Kani
   1st National conference on Thin-Walled Structures, Oroumieh,
   Iran, 241-250, February 2003 (In Persian).

 
3D analysis of initiation and propagation of delamination in
   laminar composites subjected to impact loadings
   S. Mohammadi, S. Forouzan-sepehr
   4th National Iranian Aerospace Conference, Tehran, Iran, 2002
   (In Persian).

 
Progressive multi-cracking of fiber composite structures
    S. Mohammadi, R. Rahmani-amlashi, A. Asadollahi
    Mechanical, Materials & Aerospace Engineering (SECTAM XXI),
    Florida, USA, 2002.

 
Impact resistance of composite structures
    S. Mohammadi
    International Conference on FRP Composites in Civil
    Engineering (CICE 2001), Hong Kong, 1479-1486, December
    2001.

 
A contact based method for 3D delamination analysis of
   composites subjected to impact loading
    S. Mohammadi, S. Forouzan-sepehr
    1st Asia-Pacific Congress on Computational Mechanics (APCOM
    01), Sydney, Australia, November  2001.

 
A contact based dynamic delamination buckling analysis of
   composites
   S. Mohammadi, A. Assadollahi
   Structural Engineering, Mechanics and Computation (SEMC
   2001), South Africa,1539-1549, April 2001.

 
Dynamic crack propagation using a contact based discontinuum
   approach
   S. Mohammadi
   3rd National Iranian Aerospace Conference (AERO 2000),
   Tehran, Iran, 313-323, January 2001.

 
3D progressive damage analysis of composites by combined
   finite/discrete element approach
    S. Mohammadi, D.R.J. Owen, D. Peric
    European Congress on Computational Methods in Applied
    Sciences and Engineering (ECCOMAS 2000) and VI International
    Conference on Computational Plasticity
    (COMPLAS VI), Barcelona, Spain, 322, September 2000

 
Dynamic crack propagation using a contact based discontinuum
   approach
   S. Mohammadi
   3rd National Iranian Aerospace Conference (AERO 2000),
   Tehran, Iran,313-323, January 2001.

 
Discrete element modelling of the failure of anisotropic
   laminated composite shells
   S. Mohammadi
   2nd National Iranian Aerospace Conference, Shahinshahr,
   Isfahan, Iran, 613-622, October 1998.

 
Discrete element modelling of multi-fracturing solids and
   structures
   D.R.J. Owen, D. Peric, S. Mohammadi
   Institution of Mechanical Engineers (IMECHE), Mechanical
   Engineering Publications, 1998.

 
3-D fracture analysis of composites by DEM
    S. Mohammadi, D.R.J. Owen, D. Peric
    4th US National Congress on Computational Mechanics, San
    Francisco, USA, 536, August 1997.

 
A combined finite/discrete element algorithm for progressive
   fracture analysis of layered composites
    S. Mohammadi, D.R.J. Owen, D. Peric
    4th International Conference on Civil Engineering, Tehran, Iran,
    148-158, May 1997.

 

Discontinuum approach for damage analysis of composites
    S. Mohammadi, D.R.J. Owen, D. Peric
    Computational Mechanics in UK (5th ACME UK), London, UK, 40-
    43, April 1997.

 

 
Delamination analysis of composites by discrete element method
    S. Mohammadi, D.R.J. Owen, D. Peric
    Computational Plasticity, Barcelona, Spain, 1206-1213, March
    1997.

 
Dynamic analysis of shells with material and geometric
   nonlinearities
   S. Nasiraei, S. Mohammadi, I.M. Kani
   National Conference on Dynamic Analysis of Shells, Rasht, Iran,
   August 1993 (In Persian).

 
Nonlinear analysis of reinforced concrete shells
    S. Mohammadi, I.M. Kani
    National Conference on Dynamic Analysis of Shells, Rasht, Iran,
    August 1993 (In Persian).