| |
|
 Meshless method for wave propagation in poroelastic transversely isotropic
half-space with the use of perfectly matched layer
K. Shaker, M. Eskandari-Ghadi, S. Mohammadi
International Journal for Numerical and Analytical Methods in Geomechanics,
Accepted for publication (2024).
|
|
|
Self-centering of steel braced frames using the shape memory property of
FE-SMA TADAS dampers
A. Torabizadeh, A. Foyouzat, A. Asghari, S. Mohammadi
Smart Materials and Structures, 33 (2024) 065025 (12pp).
|
|
|
A review of concurrent multiscale methods for analysis of fine scale
discontinuity problems
O. Alizadeh, S. Mohammadi
Journal of Computational Methods in Engineering, 42, 2 (2024) 1-49
(In Persian).
|
|
|
DEM-XFEM study of particle shape effect on particle breakable of
granular materials
S.M. Seyyedan, A.A. Mirghasemi, S. Mohammadi
Geotechical and Geological Engineering, 41, 5 (2023), 3115-3137.
|
|
|
Transformation-Induced Plasticity in SMA Composites Experiencing
Fiber Bridging Phenomenon
A. Ardali, J. Rouzegar, S. Mohammadi, M. Karimi
Materials Science and Engineering: A, 858 (2022), 144105.
|
|
|
An atomistic entropy based finite element multiscale method for
modeling amorphous materials
H. Moslemzadeh, S. Mohammadi
International Journal of Solids and Structures,256 (2022) 111983.
|
|
|
Evaluation of T-stress in stationary and propagating adiabatic
cracks in FGMs subjected to thermo-mechanical loading
H. Bayesteh, H. Khazal, S. Mohammadi
Mechanics of Advanced Materials and Structures, 30, 11 (2023)
2284-2303.
|
|
|
3D large strain hierarchical multiscale analysis of soft
fiber-reinforced tissues: application to a degraded arterial wall
S. Hatefi, P. Fatemi, H. Moslemzadeh, S. Mohammadi
Engineering Computations, 39,6 (2022) 2108-2143.
|
|
|
Phase evolution based thermomechanical crack closure mechanism
of shape memory polymers
A. Foyouzat, H. Bayesteh, S. Mohammadi
Mechanics of Materials 160 (2021) 103998.
|
|
|
Numerical simulation of direct shear test on granular materials
composed of breakable angular particles: A DEM-XFEM approach
S.M. Seyyedan, A.A. Mirghasemi, S. Mohammadi
Powder Technology, 391 (2021) 450-466.
|
|
|
Deformation mechanics in inclined brittle-ductile transpression
zones-Insights from 3D finite element modelling
S.T. Nabavia, S.A. Alavia, M. Díaz-Azpirozb,
S. Mohammadi, M.R. Ghassemid, C. Fernandeze, L. Barcosb,
M. Frehnerf
Journal of Structural Geology, 137 (2020) 104082
|
|
|
Wavelet-based iterative data enhancement for implementation in
purification of modal frequency for extremely noisy ambient
vibration tests in Shiraz-Iran
H. Yousefi, A. Taghavi Kani, I.M. Kani, S. Mohammadi
Frontiers of Strcuctural and Civil Engineering, 14 (2020) 446-472.
|
|
A brittle to ductile phase transition fracture analysis of shape
memory polymers
A. Foyouzat, H. Bayesteh, S. Mohammadi
Engineering Fracture Mechanics, 224 (2020) 106751.
|
|
|
Delamination analysis in bimaterials consisting of shape memory
alloy and elastoplastic layers
S. Hatefi, H. Moslemzadeh, S. Mohammadi
Composite Structures, 225 (2019) 111149.
|
|
|
Micromechanical study of particle breakage in 2D angular rockfill
media using combined DEM and XFEM
J. Raisianzadeh, S. Mohammadi, A.A. Mirghasemi
Granular Matter, (2019) 21-48.
|
|
Multiscale polynomial-based high-order central high resolution
schemes
H. Yousefi, S. Mohammadi, T. Rabczuk
Journal of Scientific Computing, 80, No. 1 (2019) 555-613.
|
|
|
An adapting cohesive approach for crack-healing analysis in SMA
fibers-reinforced composites
M. Karimi, H. Bayesteh, S. Mohammadi
Computer Methods in Applied Mechanics and Engineering,
349(2019) 550-575.
|
|
|
Quasicontinuum multiscale modeling of the effect of rough surface
on nanoindentation behavior
H. Moslemzadeh, O. Alizadeh, S. Mohammadi
Meccanica, 54 (2019) 411-427.
|
|
|
Experimental and numerical investigation into the methods of
determination of mode I static fracture toughness of rocks
A.M. Pakdaman, M. Moosavi, S. Mohammadi
Theoretical and Applied Fracture Mechanics, 100 (2019) 154-170
|
|
|
The variable node multiscale approach: coupling the atomistic and
continuum scales
O. Alizadeh, S. Mohammadi
Computational Materials Science, 160 (2019) 256-274.
|
|
XFEM fracture analysis of cracked pipeline with and without FRP
composite repairs
Z. Valadi, H. Bayesteh, S. Mohammadi
Mechanics of Advanced Materials and Structures, 27, Issue 22
(2020) 1888-1899 (published online 2018).
|
|
2D simulation of breakage angular particles using combined DEM
and XFEM
J. Raisianzadeh, A.A. Mirghasemi, S. Mohammadi
Powder Technology, 336 (2018) 282-297
|
|
|
Stable discontinuous space–time analysis of dynamic interface crack
growth in orthotropic bi-materials using oscillatory crack tip
enrichment functions
A. Afshar, S. Hatefi, S. Mohammadi
International Journal of Mechanical Sciences, 140 (2018) 557-580
|
|
|
Mechanical evolution of transpression zones affected by fault
interactions: Insights from 3D elasto-plastic finite element models
S.T. Nabavi, S.A. Alavi, S. Mohammadi, M.R. Ghassemi
Journal of Structural Geology, 160 (2018) 19-40
|
|
|
A hierarchical nano to macro multiscale analysis of monotonic behavior of
concrete columns made of CNT-reinforced cement composite
Mehdi Eftekhari, Soheil Mohammadi, Mohammad Khanmohammadi
Construction and Building Materials, 175 (2018) 134-143
|
|
|
Maximum Entropy Based Finite Element Analysis of Porous Media
E. Norouzi, H. Moslemzadeh, S. Mohammadi
Frontiers of Structural and Civil Engineering,13, No.2, (2019) 364-379
|
|
|
An extended finite element framework for vibration analysis of cracked
FGM shella
A. Nasirmanesh, S. Mohammadi
Composite Structures, 180 (2017) 298-315
|
|
|
Micro-based enriched multiscale homogenization method for
analysis of heterogeneous materials
H. Bayesteh, S. Mohammadi
International Journal of Solids and Structures, 125 (2017) 22-42
|
|
|
3D hierarchical multiscale analysis of heterogeneous SMA Based Materials
P. Fatemi, S. Hatefi, H. Bayesteh, S. Mohammadi
International Journal of Solids and structures, 118-119 (2017) 24-40
|
|
|
A finite strain integral-type anisotropic damage model for fiber-reinforced
materials: Application in soft biological tissues
F. Fathi, S. Hatefi, P. Fatemi, S. Mohammadi
Computer Methods in Applied Mechanics and Engineering,332(2017)262-
295
|
|
|
Analysis of Transpression within Contractional Fault Steps Using
Finite-Element Method
S.T. Nabavi, S.A. Alavi, S. Mohammadi, M.R. Ghassemi
Journal of Structural Jeology,96 (2017) 1-20
|
|
|
Experimental and numerical investigation of rock dynamic fracture
Mirmohammadlou, H. Memarian, S. Mohammadi, M. Jafari
International Journal of Mining & Geo-Engineering, 51-1 (2017) 37-46
|
|
Eigenvalue buckling analysis of cracked functionally graded cylindricSal
shells in the framework of the extended finite element method
A. Nasirmanesh, S. Mohammadi
Composite Structures, 159 (2016) 548-566
|
|
An efficient computational technique for modeling dislocation–precipitate
interactions within dislocation dynamics
A.R. Keyhani, R. Roumina, S. Mohammadi
Computational Materials Science, 122 (2016) 281-287
|
|
Transient analysis of stationary interface cracks in orthotropic
bi-materials using oscillatory crack tip enrichments and the interaction
integral method
A. Afshar, S. Hatefi, S. Mohammadi
Composite Structures, 142 (2016) 200-214
|
|
Molecular dynamics simulation of the nonlinear behavior of the
CNT-reinforced calcium silicatehydrate (C-S-H) composite
M. Eftekhari, S. Mohammadi
Composites Part A, 82 (2016) 78-87
|
|
|
Numerical study of thermo-mechanical coupling effects on crack tip fields of
mixed-mode fracture in pseudoelastic shape memory alloys
S. Hatefi Ardakani, A. Afshar, S. Mohammadi
International Journal of Solids and Structures, 81 (2016) 160-178
|
|
|
Numerical analysis of crack tip fields in interface fracture of SMA/elastic
bi-materials
A. Afshar, S. Hatefi Ardakani, S. Hashemi, S. Mohammadi
International Journal of Fracture, 195 (2015) 39-52
|
|
Nanoindentaion simulation of coated aluminum thin film
using quasicontinuum method
O. Alizadeh, G. Tolooei, S. Mohammadi
Computational Materials Science, 111 (2016) 12-22
|
|
|
Multiscale dynamic fracture behavior of the carbon nanotube reinforced
concrete under impact loading
M. Eftekhari, S. Mohammadi
International Journal of Impact Engineering, 87 (2016) 55-64
|
|
|
An extended element free Galerkin method for fracture analysis of
anisotropic functionally graded materials
H. Khazal, H. Bayesteh, S. Mohammadi, S. Ghorashi, A. Ameen
Mechanics of Advanced Materials and Structures, 23, No. 5 (2016) 513-528
|
|
An extended thermo-mechanically coupled algorithm for simulation
of superelasticity and shape memory effect in shape memory alloys
S.S. Hashemi Yazdi, H. Ahmadian, S. Mohammadi
Frontiers of Structural and Civil Engineering, 9, 4 (2015) 466-477
|
|
Dynamic adaptive finite element analysis of acoustic wave propagation due
to underwater explosion for fluid-structure interaction problems
S.S. Emamzadeh, M.T. Ahmadi, S. Mohammadi, M. Biglarkhani
Journal of Marine and Structural Applications, 14, No. 3 (2015) 302-315
|
|
XFEM buckling analysis of cracked composite plates
A. Nasirmanesh, S. Mohammadi
Composite Structures, 131 (2015) 333-343
|
|
XFEM–dislocation dynamics multi-scale modeling of plasticity and fracture
A. Keyhania, M. Goudarzi, S. Mohammadia, R. Roumina
Computational Materials Science 104 (2015) 98–107
|
|
Numerical analysis of rock fracturing by gas pressure using the extended
finite element method
M. Goodarzi, S. Mohammadi, A. Jafari
Petroleum Science, 12 (2015) 304-315
|
|
Strain-rate sensitivity of unstable localized phase transformation
phenomenon in shape memory alloys using a non-local model
H. Ahmadian, S. Hatefi, S. Mohammadi
International Journal of Solids and Structures, 63 (2015) 167-183 |
|
Thermo-mechanically coupled fracture analysis of shape memory alloys
using the extended finite element method
S. Hatefi Ardakani, H. Ahmadian, S. Mohammadi
Smart Materials and Structures, 24 (2015) 045031 (19pp)
|
|
|
XFEM analysis of fiber bridging in mixed-mode crack propagation in
composites
A. Afshar, A. Daneshyar, S. Mohammadi
Composite Structures, 125 (2015) 314-327
|
|
|
Thermo-mechanical fracture study of inhomogeneous cracked solids by the
extended isogeometric analysis method
H. Bayesteh, A. Afshar, S. Mohammadi
European Journal of Mechanics – A, 51 (2015) 123-139
|
|
Finite strain fracture analysis using the extended finite element method
with new set of enrichment functions
R. Rashetnia, S. Mohammadi
International Journal for Numerical Methods in Engineering, 102 (2015)
1316-1351
|
|
|
Analysis of cohesive cracking in saturated porous media using an extrinsically
enriched EFG method
M. Goudarzi, S. Mohammadi
Computers and Geotechnics, 63 (2015) 183-198
|
|
|
T-spline based XIGA for Fracture Analysis of Orthotropic Media
S.SH. Ghorashi, N. Valizadeh, S. Mohammadi, T. Rabczuk
Computers and Structures, 147(2015) 138-146.
|
|
|
Coupled thermo-mechanical analysis of shape memory effects (in Persian)
Hashemi, S. Mohammadi
Journal of Computational Methods in Engineering (Isfahan University of
Technology), 2015
|
|
Mixed mode fracture analysis of adiabatic cracks in homogeneous and
non-homogeneous materials in the framework of partition of unity and the
path-independent interaction integral
E. Goli, H. Bayesteh, S. Mohammadi
Engineering Fracture Mechanics,131 (2014) 100-127
|
|
|
Analytical solution for stress field and intensity factor in CSTDB under mixed
mode conditions
N.A. Ghavidel, H. Memarian, S. Mohammadi, M. Heydarzadeh
International Journal of Mining and Geo-Engineering, 48, No.1(2014) 55-68.
|
|
|
An XFEM multiscale approach for fracture analysis of carbon nanotube
reinforced concrete
M. Eftekhari, S. Hatefi, S. Mohammadi
Theoretical and Applied Fracture Mechanics, 72 (2014) 64-75
|
|
|
Weak discontinuity in porous media: An enriched EFG method for
fully coupled layered porous media
M. Goudarzi, S. Mohammadi
International Journal for Numerical and Analytical Methods in
Geomechanics, 38(2014) 1792-1822
|
|
|
Effect of defects on the local shell buckling and post-buckling behavior
of single and multi- walled carbon nanotubes
M. Eftekhari, S. Mohammadi, A.R. Khoi
Computational Materials Science, 79 (2013) 736-744.
|
|
|
A local PUFEM modeling of stress singularity in sliding contact with minimal
enrichment for direct evaluation of generalized stress intensity factors
S.H. Ebrahimi, S. Mohammadi, I.Mahmoudzadeh Kani
Engineering Fracture Mechanics, 105 (2013) 16-40.
|
 |
|
Strong tangential discontinuity modeling of shear bands using the
extended finite element method
A. Daneshyar, S. Mohammadi
Computational Mechanics, 52 (2013) 1023-1038.
|
|
|
Thermo-mechanical XFEM crack propagation analysis of functionally graded
materials
S.S. Hosseini, H. Bayesteh, S. Mohammadi
Materials Science and Engineering, A 561 (2013) 285-302.
|
|
|
XFEM fracture analysis of orthotropic functionally graded materials
H. Bayesteh, S. Mohammadi
Journal of Composites, Part B, 44 (2013) 8-25.
|
|
|
Analysis of thin plates by a combination of isogeometric analysis and the
Lagrange multiplier approach
Valizadeh, S.Sh. Ghorashi, S. Mohammadi, S. Shojaee, H.Ghasemzadeh
Computational Methods in Civil Engineering, 33 (2012) Issue 2, 47-66.
|
|
|
How particle shape affects the flow through granular materials
A. Nemati Hayati, M.M. Ahmadi, S. Mohammadi
Physical Review E 85, 036310 (2012), DOI: 10.1103/PhysRevE.85.036310.
|
|
|
Fracture Analysis of Composites by Time Independent Moving-Crack
Orthotropic XFEM.
D. Motamedi, S. Mohammadi
International Journal of Mechanical Sciences,54 (2012) 20–37.
|
|
|
A Two-Mesh Coupled Gas Flow-Solid Interaction Model for Blast Analysis in
Fractured Media.
S. Mohammadi, A. Pooladi
Finite Elements in Analysis and Design, 50 (2012) 48–69
|
|
|
Extended isogeometric analysis (XIGA) for analysis of stationary and
propagating crack.
S.S. Ghorashi, N. Valizadeh, S. Mohammadi
International Journal for Numerical Methods in Engineering, 89, 9 (2012)
1069-1101.
|
|
|
Fracture Analysis of FRP Reinforced Beams by Orthotropic XFEM.
S. Esnaashari, S. Mohammadi
Journal of Composite Materials – Part B, 46 (2012) 1367-1389.
|
|
|
A stabilized particle method for large deformation dynamic analysis
of structures.
H. Ostad, S. Mohammadi
International Journal of Structural Stability and Dynamics, 2011, In press.
|
|
|
Effect of batter piles on static behavior of pile groups
Bagherzadeh, A.A. Mirghasemi S. Mohammadi
Journal of University College of Engineering (University of Tehran), 2012,
45(3) 291-300. (in Persian)
|
|
|
Effect of batter piles on static behavior of pile groups
Omidali, S. Mohammadi, A. Fakher
Journal of University College of Engineering (University of Tehran), 2012,
45(3) 279-290. (in Persian)
|
|
|
Analytical solution for isothermal flow in a shock tube containing rigid
granular material
Nemati Hayati, M.M. Ahmadi, S. Mohammadi
Transport in Porous Media, 93, (2012) 13-27.
|
|
|
XFEM fracture analysis of shells: The effect of crack tip enrichments.
H. Bayesteh, S. Mohammadi
omputational Material Science, 50 (2011) 2793-2813.
|
|
|
Orthotropic enriched element free Galerkin method for fracture analysis of
composites.
S.S. Ghorashi, S. Mohammadi, S-R. Sabbagh- Yazdi
Engineering Fracture Mechanics, 78 (2011) 1906-1927.
|
|
|
Delamination analysis of composites by new orthotropic bimaterial extended
finite element method.
S. Esnaashari, S. Mohammadi
International Journal for Numerical Methods in Engineering, 86 (13), 1507-
1543, 2011.
|
|
|
Analytical derivation of tortuosity and permeability of mono-sized spheres:
a volume averaging approach.
M.M. Ahmadi, S. Mohammadi, A. Nemati Hayati
Physical Review E 83, 026312 (2011)
|
|
|
Plane-strain discrete dislocation plasticity incorporating anisotropic elasticity.
S.S. Shishvan S. Mohammadi, M. Rahimian, E. Van der Giessen
International Journal of Solids and Structures, 48 (2011) 374-387.
|
|
|
Unsteady fluid solid interaction by a kernel based particle method.
H. Ostad, S. Mohammadi
International Journal for Numerical Methods in Biomedical Engineering,
2010;26: 1596-1603.
|
|
|
Dynamic analysis of fixed cracks in composites by the extended finite
element method.
D. Motamedi, S. Mohammadi
Engineering Fracture Mechanics, 77 (2010) 3373-3393.
|
|
|
Numerical simulation of particle breakage of sharp-edge particles using
combined DEM and FEM.
A. Bagherzadeh, AA Mirghasemi, S.Mohammadi
Powder Technology, 205, 1-3 (2011), 15-29.
|
|
|
Meshless equilibrium on line method ( MELM ) for linear elasticity.
A. Sadeghirad, S. Mohammadi, I.M. Kani
Structural Engineering and Mechanics, 35, 4 (2010).
|
|
|
Large deflection analysis of flexible plates by the finite point method.
M. Bitaraf, S. Mohammadi
Thin-Walled Structures 48 (2010) 200–214.
|
|
|
Dynamic crack propagation analysis of orthotropic media by the extended
finite element method.
D. Motamedi, S. Mohammadi
International Journal of Fracture, 161 (2010) 21-39.
|
|
|
Experimental and numerical investigations of impact behaviour of high-
performance fiber-reinforced cement based composites
Y. Farnam, S. Mohammadi, M.Shekarchizadeh
International Journal of Impact Engineering, 37 (2010) 220–229.
|
|
|
Element free Galerkin method for crack tip stress analysis in orthotropic
plates
S.S. Ghorashi, S-R. Sabbagh-Yazdi, S. Mohammadi
Computational Methods in Civil Engineering (Guilan University), 1(1), 1-14,
2010.
|
|
|
A fast mesh-free Galerkin method for the analysis of steady-state heat
transfer
Forouzan-sepehr, S. Mohammadi
Journal of Aerospace Science and Technology (Sharif University), 6(1), 13-
24, 2010.
|
|
|
Analysis of blast-induced shock waves on submerged pipes
Shahmohammadi, S. Mohammadi
Journal of University College of Engineering (University of Tehran), 43(6),
679-690, 2010. (in Persian)
|
|
|
New point-to-face contact algorithm for 3-D contact problems using the
augmented Lagrangian method in 3-D DDA
S.A.R. Beyabanaki, R. Geraili Mikola, O.R. Biabanaki, S. Mohammadi
Geomechanics and Geoengineering: An International Journal,
4(3):221-236, 2009.
|
|
Analysis of shock wave reflection from fixed and moving boundaries using a
stabilized particle method.
H. Ostad, S. Mohammadi
Particuology, 7 (2009) 373–383.
|
|
|
Validation of dynamic block displacement analysis and modification of edge-
to-edge contact constraints in 3-D DDA.
S.A.R. Beyabanaki, B. Ferdosi, S. Mohammadi
International Journal of Rock Mechanics & Mining Sciences,
46 (2009) 1223-1234.
|
|
|
A dislocation dynamics based derivation of the Frank-Read sources
characteristics for discrete dislocation plasticity
S. Soleimani, S. Mohammadi, M. Rahimian
Modelling and Simulation in Materials Science and Engineering,
16 (2008) 075002.
|
|
|
Micromechanics of breakage in sharp-edge particles using combined DEM
and FEM
A. Bagherzadeh, A.A. Mirghasemi, S. Mohammadi
Particuology 6 (2008) 347-361.
|
|
|
An extended finite element (XFEM) approach for crack analysis in
composite media
S.H. Ebrahimi, S. Mohammadi, A. Assadpoure
International Journal of Civil Engineering, 3, 198-207, 2008.
|
|
|
A field smoothing stabilization of particle methods in elastodynamics
H. Ostad-Hossein, S. Mohammadi
Finite Elements in Analysis and Design, 44: 564-579, 2008.
|
|
|
Analysis of chloride diffusion in concrete structures for prediction of
initiation time of corrosion using a new meshless approach
M. Bitaraf, S. Mohammadi
Construction & Building Materials, 22 (4): 546-556, 2008.
|
|
|
Analysis of fractured rock and gas flow interaction in explosion simulations
S. Mohammadi, A. Bebamzadeh
Combustion, Explosion and Shock Waves, 43(4): 482-491, 2007.
|
|
|
3D multi delamination/fracture analysis of composites subjected to
impact loadings
S. Mohammadi, A.A. Moosavi
Journal of Composite Materials – Part B, 41(12): 1459-1475, 2007.
|
|
|
Non uniform isentropic gas flow analysis of explosion in fractured
solid media
S. Mohammadi, A. Pooladi
Finite Elements in Analysis and Design, 43: 478-493, 2007.
|
|
|
Developing new enrichment functions for crack simulation in orthotropic
media by the extended finite element method
A. Asadpoure, S. Mohammadi
International Journal for Numerical Methods in Engineering,
69:2150-2172, 2007.
|
|
|
Equilibrium on the line method (ELM) for imposition of Neumann boundary
conditions in the finite point method (FPM)
A. Sadeghirad, S. Mohammadi
International Journal for Numerical Methods in Engineering, 69:60-86, 2007.
|
|
|
Modeling crack in orthotropic media using a coupled finite element and
partition of unity methods
A. Asadpoure, S. Mohammadi, A. Vafai
Finite Elements in Analysis and Design, 42(13): 1165-1175, 2006.
|
|
|
Crack analysis in orthotropic media using the extended finite element
method
A. Asadpoure, S. Mohammadi, A. Vafai
Thin Walled Structures, 44 (9):1031-1038, 2006.
|
|
|
Multi fracture/delamination analysis of composites subjected to impact
loading
Mohammadi, A.A. Mousavi
Journal of Aerospace Science and Technology (Sharif University), 4, 195-
204, 2006.
|
|
|
Simulation of explosion by a coupled FE/DE gas-solid
interaction Mohammadi, A. Bebamzadeh
International Journal of Civil Engineering (IUST University), 4, 314-329,
2006.
|
|
|
Topology optimisation of structures by the SIMP approach and checkerboard
removal by stress-strain smoothing technique
Ghabraei, S. Mohammadi
Journal of University College of Engineering (University of Tehran), 91-102,
2005. (in Persian)
|
|
|
A coupled gas-solid interaction model for FE/DE simulation of explosion
S. Mohammadi, A. Bebamzadeh
Finite Elements in Analysis and Design, 41(13): 1289-1308, 2005.
|
|
|
Progressive fracture analysis of reinforced concrete structures by the
discrete element method
Mohammadi, M.R. Aram, A. Mahootchian
Journal of University College of Engineering (University of Tehran), 39(3),
375-388, 2005. (in Persian)
|
|
|
Dynamic delamination analysis of composite shells
Forouzan-sepehr, S. Mohammadi
Journal of University College of Engineering (University of Tehran), 39(3),
389-401, 2005. (in Persian)
|
|
|
Hourglass stabilization of the pentahedral solid element
S. Mohammadi, D.R.J. Owen, D. Peric
Iranian Journal of Science & Technology (B1), 28: 53-67, 2004.
|
|
|
HG stabilisation of pentahedral finite element method
Mohammadi, K. Karimi-zand
Journal of University College of Engineering (University of Tehran), 38(2),
297-307,2004. (in Persian)
|
|
|
3D adaptive multi fracture analysis of composites
S. Mohammadi, S. Forouzan-sepehr,
Materials Science Forum, 440-441: 145-152, 2003.
|
|
|
Contact based delamination and fracture analysis of composites
S. Mohammadi, S. Forouzan-sepehr, A. Asadollahi
Thin Walled Structures, 40, 595-609, 2002.
|
|
|
Progressive fracture analysis of layered composites by a combined finite/
discrete element algorithm
S. Mohammadi, D.R.J. Owen, D. Peric
Scientia Iranica, 6(3&4), 225-232, 1999.
|
|
|
Performance of the anisotropic Morley shell element in dynamic large
deformation analysis
S. Mohammadi, D.R.J. Owen, D. Peric
Communications in Numerical Methods in Engineering, 15, 445-455, 1999.
|
|
|
A combined finite/discrete element algorithm for delamination analysis of
composites
S. Mohammadi, D.R.J. Owen, D. Peric
Finite Elements in Analysis and Design, 28, 321-336, 1998.
|
|
|
Nonlinear dynamic analysis of reinforced concrete shells
I.M. Kani, S. Mohammadi
Journal of University College of Engineering (University of Tehran), 30(1), 3-
34, 1997. (in Persian)
|
|
|
Nonlinear dynamic analysis of reinforced concrete shells
I.M. Kani, S. Nasiraei, S. Mohammadi
Journal of University College of Engineering (University of Tehran), 58, 11-
21, 1997. (in Persian)
|
